The monsters of the industry, these lifts are designed
similar to the shafted beam lifts. They are driven by
four motors and they are mounted on at least eight large
pilings.
Cable hung platform supported at each corner
by two pilings
Pliable fine wire
stainless steel cable wound on large winders
Uses cycloidal drives, which
are very efficient, thereby reducing horsepower
and electrical requirements.
We manufacture these lifts in sizes of 75,000, 100,000
and 140,000 pounds. An industrial grade product, these
lifts are designed to withstand repeated cycling.
SUPERLIFT
...Its all in our name.
The Superlift is not an upgrade of smaller boatlifts,
but an industrially rated machine designed from
the ground up. No expense was spared to insure
the reliability that is so important when one
considers the risks associated with lifting large
vessels. Like all of QUALITY's modern designs,
the Superlift series solves the industry problems
of cablelife, lubrication and other routine maintenance.
The strongest and most powerful lifts
ever manufactured
Available in 75,000, 100,000, and
140,000 pound sizes.
Lower horsepower requirements and
faster lifting speeds, important in lifting
large vessels which are difficult to hold
in position.
Features:
Cycloidial Power Transmissions
These rugged sealed oil bath reducers
have no worm or spur gearing, but operate
from rotating eccentric disks. Like chains,
they have many contact points to spread
the load. They are advantageous because
they are so compact and efficient.
Large Diameter Winders
grooved to support the cable are of sufficient
size to minimize bending stresses.
Pliable Fine Wire Cables
Used in long life applications are standard.
Unless damaged, these special stainless
steel cables should last many times longer
than that traditionally used.
Cable Keepers
So that cables cannot uncoil when slackened.
Remote Control
With automatic stops is offered as standard
equipment.
Oversized and Permanently Lubricated
Bearings
Model
Capacity
Electrical Requirements
Motors
Lift Speed
Number
of
Pilings & Size
Piling
Spacing
Fore
and Aft
Port
to
Starboard
Superlift
75,000
240V
- 10.5 amps
(4)
1.5 HP
17"
/min
(8)
12"
Custom
Custom
Superlift
100,000
240V
- 10.5 amps
(4)
1.5 HP
17"
/min
(8)
12"
Custom
Custom
Superlift
140,000
240V
- 10.5 amps
(4)
10.5 HP
12"
/min
(8)
12"
Custom
Custom
Like other QUALITY products,
Superlift offers:
10 Year Structural Warranty
Permanently Lubricated Pulley
Bearings
Stainless Steel Hardware
Weatherproof Motor
Welded Construction in
key areas, bolting limited to components
requiring adjustment
Larger boats require special
support. It is our customary practice
to provide price quotations on large
lift orders after reviewing hull drawings
provided by the boat manufacturer.
