QBL Home Products Quality Challenge History Contact Us
Alum-A-Vator HS - High Speed

Alum-A-Vator HS is a high speed lift. It lifts at twice the speed of the Alum-A-Vator II, a convenience demanded by many customers. It further features our zero maintenance package and requires no lubrication.

     

Cables connected to four corners of boat platform
Two motor driven shafts supported from beams running parallel to the center line of the boat
Typically mounted on four pilings
Used in tidal waters, the Great Lakes & reservoirs, where water levels vary.
     

 

 

Alum-A-Vator II and Alum-A-Vator HS are available for boats weighing from 4,500 through 54,000 lbs.
Alum-A-Vator HS Specifications
Model Capacity Electrical Requirements
(per motor) 		Motors Lift Speed Bottom
Beam*		 # of Pilings
and Size		 Piling Spacing (on center)
Fore and Aft Port to
Starboard
Alum-A-Vator HS
4,500

120v-16.6amps
(2) 1.5HP
80"/min
6"x4"
(4) 8" Dia.
132"
120"
Alum-A-Vator HS
7,000
120v-16.6amps
(2) 1.5HP
64"/min
6"x4"
(4) 8" Dia.
144"
144"
Alum-A-Vator HS
10,000
120v-16.6amps
(2) 1.5HP
40"/min
8"x5"
(4) 8" Dia.
144"
150"
Alum-A-Vator HS
13,000
120v-16.6amps
(2) 1.5HP
32"/min
8"x5"
(4) 8" Dia.
144"
150"
Alum-A-Vator HS
16,000
120v-18.4amps
(2) 2.0HP
52"/min
10"x6"
(4) 10 " Dia.
144"
168"
Alum-A-Vator HS
20,000
120v-18.4amps
(2) 2.0HP
34"/min
10"x6"
(4) 10 " Dia.
168"
192"
Alum-A-Vator HS
27,000
120v-18.4amps
(2) 2.0HP
28"/min
10"x6"
(4) 10 " Dia.
192"
192"
Alum-A-Vator HS
32,000
120v-18.4amps
(2) 2.0HP
44"/min
10"x6"
(8) 10 " Dia.
72"-144"-72"
216"
Alum-A-Vator HS
40,000
120v-18.4amps
(2) 2.0HP
32"/min
10"x6"
(8) 10 " Dia.
72"-144"-72"
216"
Alum-A-Vator HS
54,000
120v-18.4amps
(2) 2.0HP
26"/min
12"x7"
(8) 10 " Dia.
72"-144"-72"
240"
 
 
Home | Products | Quality | History | Contact Us © QBL 2000 - All Rights Reserved